商品名 | [RD-003-35] Reve-D Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.5mm , 2 pieces) 스토퍼 |
---|---|
商品自身编码 | RD-003-35 |
制造商 | Reve-D |
销售价格 | $6.68 €4.94 |
相关产品 | 26 |
配送方式 | 快递 |
配送费 | 海外配送 |
结算方式 | 现金汇款, 积分 |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드
서스펜션의 움직임을 방해하지 않고 만료 각도를 조정!
RD-001 ASL 프론트 너클 용 알루미늄 너클 마개 Φ3.0mm / Φ3.5mm의 등장입니다!
발매 당시부터 호평을 받고있다 [RD-001 : ASL 프론트 너클] 완벽한 알루미늄 너클 마개가 등장합니다.
RWD 드리프트 자동차 주먹 스토퍼 (스티어링 마개)에서 최대 조각 각도를 조정하는 방식이 일반적이지만, 조각 각도를 최대로 할 때 M3의 세트 스크류를 사용하는 분도 많은 것이 아닐까요 .
M3 세트 스크류에서도 스토퍼 기능은 수행하지만 표면이 나사 모양이기 때문에, 최대 없음 각시 서스펜션의 움직임을 방해하게됩니다.
그런 때 활약하는 것이이 [알루미늄 너클 스토퍼]입니다!
M3 세트 스크류와 달리 요철이없는 표면으로되어 있기 때문에, 최대 없음 각시에서도 서스펜션의 움직임을 방해 할 수 없습니다.
또한 경량 알루미늄으로되어 있기 때문에, 철제 세트 스크류로 교체함으로써 경량화에도 효과를 발휘합니다.
라인업은 Φ3.0mm과 Φ3.5mm의 2 종류!
최대 조각 각을 실현하는 Φ3.0mm 외에도 약간만 꺼 각도를 억제하고 싶을 때 유용한 Φ3.5mm을 준비했습니다.
시판되고있는 Φ4.0mm는 만료 각도가 부족한 Φ3.0mm는 만료 각도가 너무 많다는 때는 Φ3.5mm이 위력을 발휘합니다!
현재 스토퍼로 M3 세트 스크류를 사용하고있는 분, Φ4.0mm의 마개보다 만료 각도를 늘리고 싶다고 생각하시는 분은 꼭 해봐.
<라인업>
◆ RD-003-30 : RD-001 ASL 프론트 너클 용 알루미늄 너클 스토퍼 (Φ3.0mm, 2 개입) ¥ 520 (세금 별도)
◆ RD-003-35 : RD-001 ASL 프론트 너클 용 알루미늄 제 너클 스토퍼 (Φ3.5mm, 2 개입) ¥ 520 (세금 별도)
<주요 치수>
◆ 나사 : M3 길이 4.5mm
◆ 받침대 부분 직경 : 5.5mm
◆ 받침대 밑면에서 선단까지의 길이 : 16mm
◆ 육각 구멍 치수 : 대변 1.5mm
※ RD-001 : ASL 프론트 너클에 적합 한 크기로되어 있습니다.
※ 타사 너클에 사용할 때는 위 치수를 잘 확인하신 후 구입하세요.
Adjust the angle of steering without interrupting the movement of the suspension !
Aluminum knuckle stopper Φ3.0mm / Φ3.5mm for RD-001 ASL Front Knuckle is now available!
RWD drift cars generally use a knuckle stopper (steering stopper) to adjust the maximum turning angle, but when maximizing the turning angle, many people use M3 set screws.
Even with the M3 set screw, the function of the stopper works, but the surface of the screw will hinder the movement of the suspension at the maximum turning angle .
This is where the [Aluminum Knuckle Stopper] comes into play!
Unlike the M3 set screw, the surface has no irregularities, so it does not hinder the movement of the suspension even at the maximum turning angle .
Furthermore, since it is made of lightweight aluminum, it is also effective in reducing weight by replacing it with an iron set screw .
The lineup consists of a Φ3.0mm and Φ3.5mm diameter part .
In addition to Φ3.0mm which realizes the maximum steering angle , Φ3.5mm which is an option when you want to control the steering angle only slightly is prepared .
Φ3. 5mm is effective when the commercially available Φ4.0mm has insufficient steering angle and Φ3.0mm has too much angle !
If you are currently using an M3 set screw as a stopper or want to increase the steering angle more than a φ4.0mm stopper , please try it.
<Lineup>
◆ RD-003-30 : Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.0mm 2 pieces) ¥ 520 (excluding tax)
◆ RD-003-35 : Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.5mm 2 pieces) ¥ 520 (excluding tax)
<Main dimensions>
◆ Screw : M3, length 4.5mm
◆ Pedestal diameter : 5.5mm
◆ Length from base to tip : 16mm
◆ Hexagonal hole dimensions : 1.5mm across flats
* Above dimensions are suitable for RD-001 ASL Front Knuckle.
* If you use for the other knuckles, please check the dimensions of the knuckle, wheel before purchasing.