AR44 HI-PINION AXLES

• High pinion gears for added ground clearance & better driveshaft angles
• The high pinion design allows increased gear surface contact for increased durability
• Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
• Single piece axle housing for added strength
• Small pumpkin for increased clearance and a more realistic, scale look
• Front and rear 1-piece lockers
• Bolt on link mounts
• Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
• Optimized gear ratio – 3.75 compared the previous at 2.92 – this reduces torque twist at the axle which is typically seen with other small pumpkin axle designs

KINGPIN ANGLE:

• 8 degree kingpin angle
• Improved scrub radius over the AX10 axle

AR44 UNIVERSAL AXLE SET

• Up to 45 degrees of steering
• Smooth action for an efficient drivetrain
• Compact yet durable design
• Hardened steel construction

SCX10™ II TRANSMISSION

• Transfer case design helps keep the driveshaft’s centered and as low as possible in the chassis
• Final drive ratio range 33.69 – 54.15 with available spur - pinion gear combinations
• Comes with 56T spur gear and 15T pinion / 32-pitch for durability
• All metal internal gears for strength and durability
• Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15 - Original SCX10 was 33.06
• Scale looks mimics a full size transmission and transfer case

CHASSIS MOUNTED SERVO (CMS)

• Scale looks with proper suspension geometry
• Anodized aluminum links included w/ M4 rod ends
• Adjustable servo mounting system allows for a wide range of servos to be used
• Properly designed suspension for nearly zero bump steer

ALL ALUMINUM SUSPENSION LINKS

• All links are metal including the steering
• Custom tapered center - flared ends design
• Large M4 rod ends
• Grey anodized aluminum 

ADJUSTABLE WHEELBASE

• Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer.
• Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately
• 4 link rear
• 12.3” wheelbase 

STEEL C-CHANNEL FRAME RAIL CHASSIS

• The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware.
• Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness).
• Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance.
• Simplified design makes maintenance and assembly quick and easy.
• The contoured skid plate significantly reduces hang-ups on terrain.
• Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments. 

 JCR OFFROAD VANGUARD BUMPERS

• Scale licensed JCR Offroad front and rear bumpers.
• Rear mount has been extended and stiffer plastics chosen to help limit the typical sag seen in plastic bumpers.
• Lenses included for light locations on bumpers.
• Rear tow hitch included for added scale appearance.

ADJUSTABLE BATTERY TRAY

• The adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).
• Adjustable tray that prevents the battery from coming loose or shifting while driving.
• Posts are included to fine tune the fit based on the battery you choose.
• Easy access for quicker battery changes.
• Can accommodate batteries up to 32x44x147mm (3S 5,000mAh). 

1.9 METHOD MESH WHEELS

• Officially licensed METHOD Mesh Wheels are replicated in true form for durability and a clean look.
• 1.9 BFGOODRICH ALL-TERRAIN T/A® KO2 TIRES - R35:
• Officially licensed by BFGoodrich
• 4.65” x 1.65” / 1.9 (118mm x 42.5mm)
• R35 compound 

ICON ALUMINUM SHOCKS

• Fully licensed Icon Vehicle Dynamics™ shocks feature clear coated polished aluminum bodies, complete with aluminum faux reservoirs.
• Main shock body is threaded for quick ride height adjustments and pre-load tuning ability.
• Completely rebuildable, tunable and offer consistent handling.
• 61-90mm Aluminum Shock Set with 7mm piston. 

WATERPROOF RECEIVER BOX / ESC TRAY

• Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
• Waterproof receiver box located on the side plates allows easy access and low center of gravity.
• Clean mounting surface for your ESC is large enough to accommodate up to 50x40mm footprint. 

WIRE ROUTING

• Wire routing has been thoroughly thought through to help keep your chassis layout looking clean.
• In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
• Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo. 

WB8 HD WILDBOAR™ DRIVESHAFTS

• WB8 HD Wildboar™ front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.
• A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability/easy maintenance.
• Adjustable length driveline parts included in box. 

2000 JEEP® CHEROKEE BODY

• Comes with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel).
• Clear Body with detailed decal sheet and window masks

*Photos for reference only.

Vehicle Specification:

• Length: 22.1” (562mm)
• Width: 8.9” (226mm)
• Height: 10.5” (268mm)
• Wheelbase: 12.3” (313mm)
• Ground Clearance: 3.0” (77mm)

Include:

• Axial SCX10 II 2000 Jeep Cherokee 1/10 4WD Rock Crawler Kit (1 Set)
• Decals
• Instruction

Require:

• Transmitter & Receiver
• 1/10 Scale ESC & Motor
• High Torque Steering Servo
• 2S to 3S LiPo Battery (32x44x147mm Max) & Charger
• AA size Batteries for Radio System
• Paint for Body